LS-20-04-3N X-Ray Sorter

Material to be processed

Wet, clean from clay and slurries, classified (contents of main class 85% minimum)

Material grain size classes

- 20 + 10 and -10 + 5 mm.

Material feed and transportation system

Flow-type, two treatment pass. Loading hopper (with a flange to connect to the mill's transportation system) - shaking feeder - a shaping slope chute at Pass 1 and 2 (240 mm wide) - adjustable outer divider plates for Pass 1 and 2 (concentrate-tailing) - concentrate (per each pass) and tailing channels (with flanges to connect the relevant pipelines of the mill).
Only single layer feed of material to the analysis area is allowed.

Throuput rates

20 t/hr (- 20 + 10 mm)
9 t/hr (- 10 + 5 mm)

X-ray:

number of tubes
mode of radiation

anode voltage, anode current

One tube per each pass.
2
Pulse type (pulse length - 0.5 ms; pulse period - 4 ms).
35 kV max.; 350 mA

Detection:

Luminescent signals' receivers
number of receivers, detection channels

Single-sided material luminescent detection.
Photomultipliers (PHM);
4 (2 per each pass).
Analogue-to-digital detection system; options include operation both in amplitude-time mode and in special mode, increased selectivity, using kinetic features for luminescent.

Ejection

Pneumatic, with compressed air, by means of solenoid-operated pneumatic valves
2-channel splitter (2 valves per each channel) at each pass Channel-by-channel edjection

Recovery

98% minimum

Outward flow of material per one edjection (with Throuput rate)

Max. 0.5 kg (- 20 + 10 mm), 0.3 kg (- 10 + 5 mm)

Automation

Extra option (supplied after a special order): Protection system against unauthorized access to SM, material

Checking of main systems prior to start of material feed and in the course of operation (material feed is stopped if fault is detected) Sensitivity Failure indication. Monitoring and control from the concentration mill's Automated Process Checkingl System

Only if special smart cards are available and by commissioning.

Electric power supply

380V ± 10%; 50 Hz±2%; 4 kVA

Flow rate for transportation water (0.015 MPa)

1.8 ( m³/hr) max.

Flow rate for potable quality water to cool the tubes

6 l/min max.

Flow rate for potable quality water to wash the windows of photo receptors and tube collimators (0.3 MPa)

0.4 l/min max.

Average compressed air flow rate (0.4 MPa)

0.015 m³/min

Overall dimensions (LxWxH), mass:
SM
ACR

2250×960×2300 mm; 1100 kg
765×550×1745 mm; 230 kg

Operation conditions:
ambient air temperature:

From + 10°С to + 35°С.

Relative humidity (at ambient air temperature + 25°С)

SM - to 100%

ACR - to 80%