Material to be processed

Wet, clean from clay and slurries, classified (contents of main class 85% minimum)

Material grain size classes

- 50 + 20, - 20 + 10 mm

Material feed and transportation system

Continuous flow system, single-pass. Loading hopper (with a flange to connect to the mill's transportation system) - gravity feeder with automatically controlled slide valve - a shaping slope tray (300 mm wide) - adjustable outer divider plate (concentrate-tailing) - concentrate and tailing channels (with flanges to connect the relevant pipelines of the mill).
Non-single layer feed of material to the analysis area is allowed.

Throuput rates

100 t/hr (- 50 + 20 mm)
60 t/hr (- 20 + 10 mm)

X-ray:

number of tubes
mode of radiation

anode voltage, anode current

Two-sided eliminate of material flow in the freefall chute.
2
Pulse type (pulse length - 0.5 ms; pulse period - 4 ms).
35 kV max.; 350 mA

Detection:

Luminescent signals' receivers
number of receivers, detection channels

Two-sided material luminescent detection.
Photomultipliers (PHM);
4 (2 on each side of the material flow).
Analogue-to-digital detection system; options include operation both in amplitude-time mode and in special mode, increased selectivity, using kinetic features for luminescent.

Ejection

Pneumatic, with compressed air, by means of solenoid-operated pneumatic valves
4-channel splitter device. Edjection by all 4 valves simultaneously, irrespective of the channel where luminescent was detected

Recovery

98% minimum

Outward flow of material per one edjection (with Throuput rate)

Max. 2.0 kg (- 50 + 20 mm),

1.5 kg (- 20 + 10 mm)

Automation

Extra option (supplied after a special order): Protection system against unauthorized access to SM, material

Checkingl of main systems prior to start of material feed and in the course of operation (material feed is stopped if fault is detected) Sensitivity Failure indication. Monitoring and control from the concentration mill's Automated Process Checking System

Only if special smart cards are available and by commissioning.

Electric power supply

 380V ± 10%; 50 Hz±2%;7 kVA

Flow rate for transportation water (0.015 MPa)

1.2 ( m³/hr) max.

Flow rate for potable quality water to cool the tubes

6 l/min max.

Flow rate for potable quality water to wash the windows of photo recepters and tube collimators (0.3 MPa)

0.5 l/min max.

Average compressed air flow rate (0.6 MPa)

0.03 m³/min

Overall dimensions (LxWxH), mass:
SM
ACR

2300×845×2300 mm; 1100 kg
765×555×1745 mm; 230 kg

 Operation conditions:
ambient air temperature:

From + 10°С to + 35°С.

Relative humidity (at ambient air temperature + 25°С)

SM - to 100%

ACR - to 80%